What do you lay under artificial grass? Sand or Granules?

But there are some things that you need to consider before starting your project, including whether or not you're covering an existing lawn or other surface, and what type of surface it is (concrete, decking etc.).

How To Install Artificial Grass

Although it’s not necessary, laying underlay beneath your artificial grass is highly recommended.

This helps to enhance the playability of your new outdoor space, and also helps to protect it from damage and wear. There are three types of underlay that you can choose from:

Sand – this is a good option if you plan on laying your artificial grass on soil or concrete. It will provide extra cushioning and moisture absorption when used with a turf that has been infilled with foam or rubber granules. You should avoid using sand as an underlay for artificial lawns installed over decking because it will cause the boards to warp over time.
Rubber granules – these are best used when laying artificial grass on lawn because they help prevent weeds and moss growing up through the fibers where they would otherwise be impossible to remove without damaging the synthetic fibers themselves! However, rubber granule based systems tend not work well in sandy soils despite being less expensive than other options such as polymers so don't forget that this option may require some extra effort during installation depending upon what type of project you're undertaking (e.g., putting down sod).

Polymer based systems - these provide excellent drainage properties while remaining flexible enough not only withstand foot traffic but also heavy equipment like riding mowers or snow blowers too!

They're suitable for all types of substrates including those made from concrete or clay which makes them ideal if one day decides later down life cycle requires changing surface material underneath their lawn then simply removing old polymers layer then installing new one type instead replacing entire system altogether."

What do you put under artificial turf?

Underlay is the layer of material that sits underneath artificial grass. It provides strength and protection for your new lawn, and it also helps to lock in its shape. Here are some options to consider:

Artificial grass underlay

This is the most common choice for underlay, as it’s lightweight yet durable enough to last over time. Its main function is to protect your natural ground from any damage caused by the artificial turf—and if you have kids or pets running around on it often, this kind of underlay will help protect those surfaces as well!

Sharp sand

Sharp sand can be an effective option if you don’t want to spend money on synthetic materials like rubber crumb or polypropylene foam.

Sharp sand is an inexpensive product that doesn't take up much space when laid down (once installed).

It's also easy to clean up after yourself while laying down this type of underlay material; just sweep away any excess dirt before installing any other layers below your new lawn area!

How to lay artificial grass on decking.

Lay the turf on top of the decking. Make sure that your decking is level, dry, clean and secure before you begin laying artificial grass.
Start at one end of the decking and lay the turf in double rows along each side until it reaches your desired length (usually by following a straight line from one end to another).
On each side, repeat this method until you have laid enough turf to cover all areas where it will be installed as shown in diagram A below:

How to lay artificial grass on concrete.

Laying artificial grass on concrete is fairly straightforward once you know the best way to do it.

First, you'll need to install a weed membrane under your new lawn.

The weed membrane will prevent weeds from growing through the artificial grass and make sure that it stays in place for many years to come.

Once the weed membrane is installed, lay the artificial grass over top of it with about an inch or two of space between them.

Then cover up any exposed areas with sand so as not to leave any gaps where water can collect and cause damage in time.

How To Lay Artificial Grass On Soil.

For the best results, it is recommended to lay artificial grass over a well-prepared base.

For example:

The ground should be level and free from any bumps or depressions. Any large rocks or obstructions should be removed in advance of laying the turf. The soil should also be fine and free from stones.
A layer of sharp sand can be added to improve drainage if necessary. This will help prevent water pooling on top of your lawn, which can damage its surface and create an uneven playing area for children or pets running around on it! You can use a mower with grass catcher attachment to collect this excess material as you lay down each roll of artificial grass turf (and then dispose of it responsibly).
It’s also important that no weeds are growing through the topsoil when you install your new landscape coverings; this is especially true at ground level where they may hide under natural grasses before they emerge above ground level - so make sure there isn't any green growth happening underneath before starting work here too!

How To Lay Artificial Grass Onto Existing Lawn.

If you're laying artificial grass onto an existing lawn, the first thing to do is remove all of the old grass.

Luckily, this can be done with relative ease by using a strimmer. A strimmer is a tool that allows you to cut through any surface at a fast pace and with minimal effort.

When cutting down your existing lawn with a strimmer, it's important to remember two things:

Keep the strimmer moving at all times so that you don't leave any strips behind (which may be unsightly).
Cut as close to the ground as possible so that you don't damage any roots or bulbs underneath.

Top Tips For Laying Artificial Grass.

You'll need to lay your artificial grass out flat and in a single layer, without any overlapping.

This is crucial for getting the best possible results from your new lawn.

If you're planning on laying it yourself, make sure that you take care of this step before you start laying down the turf.

If you're working with a professional landscaper, they will be able to do this for you—but it's still helpful to know how to prepare the ground properly so that they can get started quickly once they arrive at your property.

There are a variety of different things that you can use

Depending on the type of surface that you are laying the grass onto and whether or not you are covering an existing lawn or other surface.

In order to lay artificial grass on a hard surface such as concrete or decking, it is best to use an underlay.

This will help protect the underlying surface from getting scratched and also ensure that the grass has a firm base to sit on.

The choice of underlay will depend on what you are covering but some examples include:

A layer of sharp sand with a weed membrane laid over top.
Polypropylene matting which can be purchased in rolls or mats and doesn't need to be cut down before use.

Unlike laying onto softer ground like soil, there is no need for any kind of drainage system when using an artificial lawn around your home or garden because water won't sink through the turf itself.

However, if you are planning on using this type of ground cover outside your property then we recommend installing some kind of drainage system so as not to cause damage to any plant life growing underneath it

Conclusion

So, now that you know all about the different types of underlayments, what do you think? Which one is best suited to your needs? We would love to hear from you on this topic so please leave a comment below. If you have any other questions or comments then feel free to contact us via email

What do you lay under artificial grass?